Email:postmaster@pengfei-fasteners.com Shaoxing Pengfei Bedding Nail Co.,Ltd

Shaoxing Pengfei Bedding Nail Co.,Ltd

Domestic Fine Wire Staple (19-23 GA.) Market Materials Existing Problems



Domestic Fine Wire Staple (19-23 GA.) market materials existing problems

Fine wire nail 19-23 (GA) with the scope of the material including from general carbon structural steel, alloy structural steel, carbon tool steel, alloy tool steel, high-speed tool steel, stainless steel, martensite steel aging to cemented carbide, insoluble alloys, high temperature alloy, non-ferrous metal and so on can use, mainly alloy tool steel. With the development of China's jig industry, the number of jig materials, quality, variety and performance have high new requirements, and the market of jig materials has also been developed rapidly.

The requirements of the fixture industry behind the production of Chinese Fine Wire Staple (19-23 GA.) are mainly in several aspects:

The sales channels are not open.

The standard is small, black, round bar, flat steel, concentrate, prehardening materials and products. Fixture in China accounted for about 80% of the black round bar steel market, users of forging materials, after the restructuring of the material utilization rate is low, production cycle is long, can't meet the needs of fixture manufacturing.

(3), the general quality of fixture steel, high quality of fixture steel, less demanding quite partial jig need to pass the vacuum refining and electroslag remelting steel, some foreign companies fixture is larger than 150 mm cross section of steel to ensure that the iron and steel of high purity, high density, high isotropic and China by electroslag remelting steel clamp share is very small.

Fine Wire Staple (19-23 GA.) are used for the precision rivets that rotate on the surface of the hardened liner (except for the smaller size 0 and 1). All parts are galvanized before assembly. The clamping bolts of the tempering and galvanizing are fitted with t-nut or special nut and can be adjusted flexibly. Some species and stainless steel models or models to choose fine wire nail with a safety lock (19-23 GA) four connecting rod dead point is to use mechanical principle and design of a fast clamping, quickly open the institutions.

The use of Fine Wire Staple (19-23 GA.) has been used in foreign countries for more than half a century and began to be used in China. It was used in the early 1990s and was widely used since the late 1990s. Fine wire nail 19-23 (GA) is widely applied rapidly in industrialised countries various production-oriented enterprises get the intricacies of is: it is clever use of four bar linkage, to design a proper self-locking clamping point, to achieve the purpose of accurate positioning, fast clamping. Eliminate unnecessary clamping hours during mass production, and stabilize inner quality and appearance quality, improve the qualified rate of finished products, increase production speed, and significantly reduce production cost.

The products of domestic products are cheap and cheap, and provide a shortcut for enterprises to reduce the cost of procurement without changing the quality. Fine Wire Staple (19-23 GA.) currently has no international standard. But the brand name factory has a common tacit standard, that is "self-locking clamping point" accurate quick clamping cycle times. As we all know, the linkage mechanism is one of several major transmission mechanisms. We can make it immovable and self-locking. Self-locking is the key. The location of Fine Wire Staple (19-23 GA.) life span: the moment when the Fine Wire Staple (19-23 GA.) is lost from the clamping function, the end of the life of the Fine Wire Staple (19-23 GA.). The life of qualified Fine Wire Staple (19-23 GA.) is used as an example for welding process. In the case of poor environment, the welding slag is more than 100,000 -- more than 500,000 times. In the better environment, the welding slag is less and dust, such as car body welding, more than a million times. In 2001, I went to a full-length welding line that was purchased from Taiwan at the beginning of 1994, with an annual output of 150,000, and used 702 -- C nearly a thousand, only five to be replaced.

There are some individual welding equipment factory, because the equipment factory warranty period is only one year, we hope that we can lower the price on the premise of lowering quality. We beg to differ. The key to the Fine Wire Staple (19-23 GA.) is the self-locking, which is not a point of the lock that is reduced by a bit and is reduced only a little bit, which may lead to a little bit of the fast clip life. We will lower the price and reduce the new process utilization under the precondition of quality and quality. We will reduce the use of advanced management and increase the capital. Our quality assurance is the premise of the overall equipment quality guarantee, is the premise of the equipment user's guarantee production, stable production, and obtain benefit.

Copyright © Shaoxing Pengfei Bedding Nail Co.,Ltd All rights reserved.
QR Code