Eliminate M45 Series Clinch Clips Rusty Locked Penta
Today, the M45 Series Clinch Clips is tightened in the machinery, equipment, vehicles, and railways. That is to say, M45 Series Clinch Clips is indispensable for connecting a fastening part in many fields. The M45 Series Clinch Clips manufacturers are troubled by "How to eliminate the M45 Series Clinch Clips rust lock symptoms?" This is also a common problem in our daily life, but many people do not know how to deal with the flexible, in this, the Chinese standard parts network to share the exclusion of M45 Series Clinch Clips rusted penthouse.
1, "shock": for those rusty lock screw stud stainless steel M45 Series Clinch Clips, we can use the hammer on its wrench to the appropriate intensity of the beat, so that the M45 Series Clinch Clips shock, so that can lock The screw was easily screwed down.
Second, the "knock": with the edge of the top of the hammer on the rusty lock the stainless steel studs in order to make the rusty M45 Series Clinch Clips loose. For the impact of the intensity of the nut can be installed according to the specific location of the nut, for example, bike pedal on both sides of the bolts on the nut, according to the pedal of the metal structure, metal thickness, etc. to a reasonable grasp of the percussion The intensity. If this does not solve the problem, we can use the hammer along the counterclockwise direction of the nut to beat, so that you can make the M45 Series Clinch Clips was easily removed. (Guide: M45 Series Clinch Clips knowledge: cylindrical head welding nail maintenance should pay attention to six points)
Third, the "burning": This method is suitable for use in the rusty lock more serious situation, if the above magic can not solve the problem, we can use the flame of the flame on the rusty nut burning, after burning , To the red M45 Series Clinch Clips thread drop on the oil, so you can easily remove the rust-locked M45 Series Clinch Clips. (The principle of this method is the "thermal expansion and contraction" principle, it should be noted that some plastic and other heat and easy melting devices prohibit the use of this magic.
Four, "red": due to the more serious rust, resulting in the top of the screw deformation of the M45 Series Clinch Clips, we can use this method. Only in the vertical direction of the screw top, with the hammer and screwdriver to the impact, the purpose is to form a v-shaped groove, and then along the direction of the screw out of the M45 Series Clinch Clips impact until it is loose, and finally we can With pliers easy to disassemble it. (This method is also more suitable for use in the "a" or "ten" when the screw appears in the case of slip).
5, "welding": This magic is suitable for use in the case of rust because of the more serious, in the demolition of the screw when the screw off the case. In response to this situation, we can use electric welding in the screw on the screw welded on the length of a suitable iron, and then combined with the above magic for its reasonable demolition. The cross-sectional size of the welded iron can be determined according to the diameter of the stainless steel screw.
Warm reminder: When the phenomenon of rusty lock, we must use the scientific and rational use of the above five methods on the M45 Series Clinch Clips to disassemble, otherwise there will be screws hexagonal angular skid, screw is twisted, wrench was twisted Bad and so on.
- What Wire Works
- Process And Role Of Wedm Machine Tool
- Wire Used In The Environment What Are The Requi...
- How Can I Extend The Life Of Wire?
- Wire Machining Precision Is Very Important In
- Purchasing Considerations For Wire-cutting Machine
- Special Wire Guide Pulley How To Choose?
- How To Improve The Efficiency Of Wedm Machine Tool
- Wire Cutting Length For High Speed Machining Pr...
- Detailed Analysis Of The Surface Roughness Of W...
- The Four Factors That Affect The Heat Treatment...
- For Ü Type Nail, You Know How Much
- What Are The Classification Of Nail Nails?
- The Difference Between Pin And Riding Nail
- The Model And Description Of The Code Nail
- What Are The National Or Industry Standards For...
- Do You Know How Many Types Of Nails Are Classified
- Nail Gun Manufacturers Give You Up. Are You Ready?
- The Rust Of Industrial Nails Is Not Necessary T...
- How To Remove The Clinch Clips