Home > News > Content
Stainless Steel Clinch Clips Summer Production Need To Pay Attention To What?
- Oct 10, 2017 -

The weather is getting hot, and it is coming soon in June that means the summer is coming! There is a lot of attention to the production of Clinch Clips for high temperatures in summer.
Summer temperatures can be imagined, then in the stainless steel Clinch Clips summer production we need to pay attention to what aspects? The Clinch Clips plant summed up the following:
First, the safety of workers: summer in the workshop production of high temperatures. Summer heat measures must be done. There are also staff accommodation and rest must be noted. The worker is the starting point for our production of Clinch Clips, so this is important!
Second, no matter what season we should keep the stainless steel Clinch Clips surface can not adhere to organic juice (such as vegetables, soup, sputum, etc.), in the case of water and oxygen, constitute organic acids, long time organic acid on the metal surface corrosion.
Third, the attachment of dust or heterogeneous metal particles in the summer sometimes humid air attached to the condensate with the stainless steel Clinch Clips, the two together into a micro-battery, triggering the electrochemical reaction, the protective film is damaged, said Electrochemical corrosion.
Fourth, in contaminated air (such as containing a lot of sulfide, carbon oxides, nitrogen oxide atmosphere), in case of condensate, the formation of sulfuric acid, acetic acid liquid point, causing chemical corrosion.
5, stainless steel surface adhesion containing acid, alkali, salt substances (such as decorative walls of alkaline water, lime water splash), causing local erosion.
Stainless steel Clinch Clips is a family of iron alloys, each containing more than 12% chromium. Chromium, is a corrosion-resistant ingredients, so all stainless steel has a strong corrosion resistance. In general, the higher the chromium content, the better the corrosion resistance.
Stainless steel Clinch Clips in the use of nickel fasteners in the use of stainless steel for the material process, has been more dependent on the use of nickel elements, but in the case of global prices of nickel elements, the fastener prices have also been greatly affected The Fastener production enterprises in order to slow down the cost of pressure, improve the competitiveness of fasteners, especially looking for replacement materials, the production of low nickel stainless steel fasteners.
Stainless steel Clinch Clips fasteners If you use stainless steel as the main material, but also to understand the magnetic properties of stainless steel itself. Stainless steel is generally considered not to have magnetic, but in fact austenitic series of materials after a certain processing technology, there may be a certain magnetic, but if this is that the magnetic properties of stainless steel is to determine the quality of fasteners is not correct.
All stainless steel Clinch Clips contains carbon in addition to iron and chromium. But the carbon content is very low and is carefully controlled. The reason is that carbon can be combined with chromium to form carbides, making the role of chromium components in the formation of corrosion resistance becomes very small. Therefore, in order to achieve the effect of corrosion, when the carbon content increases, the corresponding increase in chromium content.
Soluble emulsifiers usually contain soil, solvent, emulsifier, builder, corrosion inhibitor and a small amount of water. The effect of water is to dissolve the emulsifier, the cleaning agent can dissolve the fine Clinch Clips surface dirt, but also in the surface to leave rust film. The emulsifiers and detergents can hold the grease particles and dissolve them into a cleaning agent containing Clinch Clips solvent and oil. Emulsifying cleaning agent is a pure pure oil product, Clinch Clips its diluted in water after the white emulsion into a liquid.
Clinch Clips alkaline cleaning agent from the builder and surfactant alkaline earth metal salt mixture prepared, is one of the most widely used cleaning agent. The starting point for adding each salt and surfactant is primarily to ensure the cleaning effect, followed by the economy. Requires Clinch Clips cleaning agent PH value of 7 or so. The cleaning components of such cleaning agents are hydroxides, silicates, carbonates, phosphates, borates and organic compounds.
Hydroxides provide the highest degree of alkalinity, are relatively inexpensive, and are added in small amounts to have sufficient alkalinity and conductivity, which is important for electrolytic cleaning and saponification. The disadvantage is that it is more difficult to rinse, dirty non-saponification washing effect is poor. The pH of the solution at 1% concentration is 1.3. Alkaline cleaning solution can be used sodium salt, can also be used potassium, mainly used for steel alloy Clinch Clips cleaning.

Copyright © Shaoxing Pengfei Bedding Nail Co.,Ltd All rights reserved.